Cement Testing Equipments

Product Details:

This is used for determination of resistance to wear for cement concrete flooring tiles. Tiles specimen trace-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding path and after specific number of revolutions of the grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose. A bracket is provided to hold the specimen.

Product Specification  

Additional Information:

• Production Capacity: 100
• Delivery Time: 1-2 Weeks
• Packaging Details: Export Worthy

Product Details:

Additional Information:

• Delivery Time: 1-2 Weeks
• Packaging Details: Export Worthy

Product Details:

For making standard rectangular specimens of 40 x 40 x 160mm. of Portland and pozzolana cement mortar for determining the transverse strength.

Specifications:

The jolting apparatus consists of a rectangular table rigidly connected by two support arms to a spindle at a horizontal distance of 800mm from the centre of the table. There is a projecting lug with a plane face on the lower face of the table beneath which is a stop with a rounded upper surface. The table can be raised and allowed to fall freely on the stop by a cam which is connected to a motor and gear box through a V-belt and pulleys. The cam rotates at a rate of 60 rev./min. A stroke counter fitted with micro-switch is provided which stops the machine after surmounted by the hopper can be clamped rigidly to the table. Supplied complete with mould and hopper. Suitable for operation on 230 Volts, single phase. A.C.supply.

Spares and Accessories:

• Steel mould with base plate having three compartments each having 40mm x 40mm x 160mm. internal dimensions.
• Apparatus for demoulding the specimen.

Additional Information:

• Production Capacity: 100
• Delivery Time: 1-2 Weeks
• Packaging Details: Export Worthy

Product Details:

Product Description

VIBRATING TABLE

 

Introduction

• The Vibrating Table is used for compacting concrete cubes and cylinders.

 

 

General Description and Specifications 

• It is designed to carry a load of 140 kg.
• The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet.
• The vibrations are imparted by means of off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top.
• The table top is 50cm x 50cm. and has stops along its edges to prevent moulds from walking off the table during vibration.
• A cross arm adjustable on a vertical rod at the center of the table is provided to hold the moulds while operating the table.
• The variable pitch pulley arrangement permits the frequency to be varied stepless between a maximum of 3600 vibrations down to 2600 vibrations per minute.
• A speed regulation handle is provided for increasing or decreasing the frequency.
• A switch is provided for starting the motor.
• Suitable for operation on 220-240 volts, 1 phase, 50 cycles, A.C. supply.

 

 

Note available Sizes of Vibrating Tables 

• size 50cm x 50cm
• size 75cm x 75cm
• Size 100cm x 100cm.

Additional Information:

• Delivery Time: 1-2 Weeks
• Packaging Details: Export Worthy

Product Details:

Cement Autoclave for a high pressure steam

as per IS: 4031, ASTM C151, AASHTO T107 with Digital temperature Controller.

Uses accelerated means of estimating delayed expansion of Portland cement caused by hydration of CaO and MgO. Test bars are exposed to controlled steam pressure and corresponding constant temperature. Unit produces 60-350 psi (0.4-2.4MPa) range of as pressures and consists of steam vessel, pressure regulator, pressure gauge (0-600 psi x 5 psi), air vent valve, power switches and safety pop valve set at 350psi. includes Digital temperature controller cum indicator, wrench and gasket.

Consists of a stainless steel cylinder with an insulated cover. Mounted on a sturdy supporting frame, enclosed in a heat insulating metal housing. . Inside chamber size; 15 cms dia x 60 cm height.

Additional Information:

• Delivery Time: 2-3 Weeks
• Packaging Details: Export Worthy